++ TurboZentrum will be closed on May 9th and 10th due to the national bank holiday. We'll be back for you on May 13th! ++
Turbo Heat Shield GEN 3 Onyx - Single T4
The best Turbo heat protection blanket on the market
New GEN 3 DEI - the strongest, most heat resistant shield available for T4 turbine housing and similar
DEI raised the bar! The most technologically advanced turbo shield ever!
DEI incorporated all their experience to build the absolute best turbo shield on the market. By developing advanced textiles and diving deep into what is needed to control turbo heat, DEI developed the GEN-3 Onyx Turbo Shield. A Silicone coated Onyx outer layer with multiple stainless steel and silica inner layers. Without a doubt the strongest, most heat resistant shield available.
OUTER SHELL
- Coated in silicone to insulate and hold up under extreme conditions Prevents fraying & encases seams to make them over 4 times stronger
- Thick layer of silica insulation keep heat in turbo shield and turbo housing Silica has a low thermal conductivity making one of the best insulators
- Stainless steel, glass fiber & silicone adds to insulating and thermal properties Increases seam strength, durability and insulation value
- Stainless Steel fabric holds up against the highest temps
- Will not break down or become brittle with heat
Radiant Heat Resistance: 1400°C / 2500°F
Size: T4
Color: Black
Kit: with shield and wire only
TURBO APPLICATION GUIDE Measuring your turbo size
- DEI Turbo shield sizes are based on two basic measurements. The first measurement is the circumference of the turbo not including the flange. The second measurement is the width of the turbo at it’s widest point not including the flanges. After measuring, refer to the chart to find the correct shield.
Fits, among others, the following exhaust housings:
- Garrett GT3582R with T4 exhaust side
- Garrett GT3788R, GT4088R, GT4094R
- sitting tight on Garrett GT4294R, GT4202R, GT4508R, GTX4294R, GTX4202R, GTX4508R
- BorgWarner S300 from 16cm2 turbine housing
- BorgWarner S400
- Dodge 6,7L Cummins 07-10 series turbocharger
- Chevy / GMC LLY, LBZ, LMM 6.6L Duramax
- Ford 6,0L Power Stroke 03-07
Warning!
Here you buy the blanket individually. We also offer a complete set with fixing material and heat protection tape.Price for heat protection blanket as shown, without turbine housing.
Only buy original titanium heat protection products!
With us you get the original titanium heat protection products from the USA. If you observe the market a little, you will notice that there are many similar products, which are offered as titanium heat protection and look exactly like that. This often much cheaper material comes from China, is much harder and therefore more brittle. It is not comparable to ours. The heat rejection and life are much worse. Do not save money at the wrong end. Take the original!
- Usage: Turbocharger / turbine housing
- Color: black
- Product Type: Turbo heat shield T4
- Item weight: 0,50 kg
With subscribing into our free newslerrs you will receive a 10€ voucher for your next order. The newsletters are a selection of technical informations, news about new products and special promotions. You can unsubscribe for free at any time.