+++ On Thu 26.06. and Fri 27.06. we will carry out an inventory. We are closed on these days. We will be back for you on June 30th. +++
×

+++ On Thu 26.06. and Fri 27.06. we will carry out an inventory. No order confirmations will be sent out on these days and the online stock levels may appear incorrect. +++



BorgWarner AirWerks CHRA S300SX-E 83/76mm - 13009097057



896,18 €
incl. 19% VAT , plus shipping costs
Status:
will be reordered for you**
Order within the next x hours x minutes x seconds and your package will arrive on 11.08.2025 - 19.08.2025

BorgWarner AirWerks S300SX-E 83/76mm Turbo Cartridge

BW part number 13009097057

Genuine BorgWarner AirWerks Turbocharger

Original BorgWarner AirWerks SX-E Cartridges are a low-cost way to rebuild an AirWerks Turbocharger. In the past you always have to buy a new Super Core, which included a new compressor housing. But normaly only the bearings or a turbine / compressor wheel is damaged. Now we offer you as official BorgWarner Performance Distributor exclusive AirWerks cartridges (CHRA).

Notice: When ordering only an AirWerks CHRA, be sure to check if your compressor and turbine housing has no damages, like scratches or cracks inside. Only when your compressor and turbine housing is in good condition, then a new cartridge make sense. Otherwise you need a Super Core or a complete new turbo! The mounting kits for the turbine and compressor housing as well as the exhaust gas and compressor housing itself is always required. If the turbine housing has a wastegate flap, you also need an internal wastegate actuator and a suitable holding plate.

Performance rating: 400 - 775 HP
Compressor housing: None
Compressor wheel: Inducer 61,44mm / exducer 83mm (exakter Wert ist 83,47mm)
Turbine housing: None
Turbine wheel: Inducer 76,20mm / exducer 67,56mm

- Only CHRA, the turbine and compressor housing must be used from your older AirWerks turbocharger or purchased separately
- Forged milled aluminum compressor wheel with extented tip technology
- Integrated speed sensor port
- High Flow compressor housing
- Fits for BorgWarner AirWerks S300SX-E turbine housings with 80mm turbine wheel

Turbine housing and compressor housing must be purchased separately.

Video
What are the advantages of a turbo with ball bearings? Better than journal bearings? | Turbocharger simply explained
Verdichterrad gefräst oder geschmiedet oder?
Extended tip technology on the compressor wheel of the turbocharger | Turbocharger simply explained

Features
Accessory
Similar
Secure your 10€ voucher!
newsletter
10€ Voucher with Newsletter Registration

With subscribing into our free newslerrs you will receive a 10€ voucher for your next order. The newsletters are a selection of technical informations, news about new products and special promotions. You can unsubscribe for free at any time.

Loading ...